Tosca Industries builds another successful Lube Service Truck

Tosca recently completed the build of another fully equipped remote Lube service truck. The Body mounted on a Hino GT 4x4 chassis induced storage tanks for 6 new oils of capacities between 250 and 600 litres, a waste oil capture and delivery system, a remote fill manifold with tank monitoring systems to improve operator safety and productivity.

The operators equipment was powered via a Diesel compressor/welder/generator connected to the truck fuel tank delivering 30CFM of free air, enough to run the biggest of air tools and provide plenty of power to the pumping equipment. The unit also has a welder to allow on site repairs and 2x safety switch protected 240 volt outlets for electric tools. All controls were remote mounted to the ground level to improve operator safety and efficiency.

The body also had a range of tool compartments fitted with LED strip lighting, LED work lights, LED beacons. For safety the truck also had a Roll over protection system (ROPS). The rear section was fitted with fold out step units and an opening safety rail to allow storage of additional equipment if required.

If you are in the market for a service or Lube truck of any size, the team at Tosca can help you design and build the perfect layout that will help keep you machinery in tip top condition on site, while improving the safety and productivity of your operators.

Tosca Bash Plates Now Available for Mitsubishi Challenger and Triton

Tosca Industries is now able to supply bash plates for current series Mitsubishi Challenger and Triton. Tosca plates are designed to replace the existing two plates with stronger ones.

Tosca bash plates are made of 3mm steel and are designed to easily bolt on in place of the existing plates.

Mitsubishi Challenger and Triton plates are currently made on demand but will become a regular product if demand proves high enough.

Please visit www.tosca.net.au for more information or to make an enquiry.

Tosca Bash Plates for Pathfinder and Navara

Our bash plates are loved by many. Here are the answers to some of the most commonly asked questions about bash plates

What are bash plates?
Bash plates are strong metal plates designed to protect the undercarriage of 4WD vehicles. Tosca's bash plates are made of 3mm etch primed steel and were originally designed for a 2006 Nissan Pathfinder R51. There are five plates in the full set: intercooler, sump, transmission, transfer case and fuel tank.

I want 5mm plates. Can you help me?
Yes. But these will only be made when you have placed an order and they will be more expensive. Please call us for a quote.

Who fits the plates to my vehicle?
Most people fit the plates themselves. The plates are easy to fit with all the front plates designed to bolt straight into existing holes. We include the longer bolts required for this. The fuel tank plate requires three extra holes to be drilled and tapped in the chassis. This is relatively simple but some people prefer their mechanic to do this for them (they have the necessary hoists).

We are happy to fit the plates for you, however we are a busy workshop, and you will need to arrange a day to leave your vehicle with us. The charge for this service is $270 for all five plates and $80 for the front two plates only.

My vehicle has a nudge or bull bar. Will the plates fit?
Yes, they fit with a bull bar.
Yes, they fit with a nudge bar but... you will need some additional spacers and longer bolts. Please talk to us before you place your order.

Can I come and pick up plates now?
We generally have a few sets of plates in stock, but sometimes we do run out so please call us first! If you'd like the plates painted you'll need to allow a few extra days. If you are using your 4WD the way it was intended then paint is not going to stay pretty for long. Most people don't bother with this.

Can you send plates anywhere in Australia?
Yes. Tosca plates are currently being used in most states. Call us for a freight quote.

I heard that the plates will fit my Navara. True?
The sump and intercooler plates also fit the Spanish built Nissan Navara D40 2005, 2006, 2007 and 2008 models. The later models are built in Thailand and we have not yet fitted plates to these models.

Will the plates fit my Pathfinder R50?
Unfortunately not. The undercarriage is vastly different to the R51.

What plates can I see in the picture above?
You're looking from the front of the vehicle, so you can see the front intercooler and sump plates.

Return of the Tosca

After a short break during which our old blog grew a few weeds and nearly buckled under the weight of 18 months dust, we are back! The weeds have been poisoned, the cracks bogged and an industrial blower has blasted the dust to a happier life on some other neglected online persona.

This is despite the blog admin email address being hijacked by another user. A user in the same office as it turns out, but they could be in the Sahara for all the good that is unless they can remember the password.

It is remarkable how little can change in 18 months. Why is it Easter before anyone remembers to order the truck that has to be finished before end of financial year? In a year where Easter descends rather later than normal, simple arithmetic dictates that unless an army of oompa loompas marches into the workshop, not everyone will get their end of financial year wish.

If you are one of the handful of people who read this blog and the previous comment landed in a fertile part of your brain and sprouted fervent end of financial year desires then know that you are likely too late. Give us a call though, you never know, there's always a good supply of coffee at Tosca. Those oompa loompas might just be ready to upgrade their tastes and launch a Tosca takeover.

Tosca Industries Approved ROLA∙CASE Distributor

Tosca Industries is pleased to announce that they are now an approved distributor for the popular ROLA∙CASE and ROLA∙Shelf vehicle storage solutions.

These Australian products have helped many owners of trade, service and specialized vehicles organize their equipment, tools and merchandise.

Tosca regularly fits ROLA∙CASE cabinets, shelving, gas bottle holders and more in trucks, vans, canopies and 4WDs. The products are suitable for all enclosed vehicles.

Call Tosca today to discuss how you can use ROLA∙CASE in your vehicle to save space, organize your gear, make your life easier and ultimately save money.

3D design brings vehicle bodies to life

Tosca Industries has always led the field in innovative vehicle body design. Now with new 3D design tools, Tosca can bring customers’ design ideas to life.

“We regularly talk customers through the design process. People often have a picture of that dream vehicle in their head. It’s getting it out of their head and into the real world that’s the challenge,” says Operations Manager Adrian Toscano.

While experienced at 2D drawings, this is the first time staff has used a 3D modeling tool.

“There is scope for great accuracy and attention to detail. We are able to show customers how all the toolboxes, shelves, drawers, steps, doors and ancillary equipment fit together. Working with the customer we can refine the design before we start to build the vehicle body,” said Mr Toscano.

Tosca Industries has seen an increase in vehicle body building efficiency since implementation of the new design system, which also allows the strength of parts and moving components to be assessed.

The picture attached is of a horse float recently designed using the new 3D design tools.

“We pride ourselves on our detailed product knowledge. This new design tool allows us to provide even greater customer service.”

Lift-off bodies

Tray or canopy – what do you need today?

Easily removable lift-off bodies have always been popular at Tosca Industries.

This innovative design allows you to turn your vehicle back into a ute and leave your gear fully secured in your canopy.

The lightweight aluminum canopy attaches easily to a ute or can stand supported by heavy duty steel legs. The system is simple to operate and comes with fully integrated legs and handles. No bulky attachment pieces are required – your storage space isn’t compromised at all.

In minutes, you can reverse your vehicle in, attach or remove the canopy and drive off!

Get organized – get a lift-off body from Tosca Industries today.